Blog entry by Brenda Aragon
Double Glazing Lock Repairs
The use of high-quality locks on your doors and windows helps to prevent burglars from getting into your home. They don't usually like to break glass or try to squeeze through windows.
Some double glazing owners, however, have experienced problems with their door or window lock after the installation. These issues can usually be fixed without the need for new double glazing.
Broken or Faulty Locks
A locksmith can repair your uPVC window lock or Jerealas (https://www.jerealas.top) door lock if it's damaged or is not working properly. They can repair hinges, striker plate and locks for your double glazing. They can also reposition the cylinder to fix any misalignment problems that may be causing your handle to not operate properly.
If the key fits in the lock but it won't turn or is difficult to insert, the mechanism might be locked up. This can be caused by grime or dirt getting stuck within the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. It is important to make use of a dry lubricant such as graphite or teflon instead of oil which attracts dirt and stick to the inside of the mechanism. After lubricating the lock, you should insert the key and then try to turn it. The lubricant should work its way into the mechanism and the lock should be able to turn smoothly.
A malfunctioning lock could be caused by loose screws within the mechanism of the lock. They can loosen and fall out or break completely, preventing the lock from functioning properly. A screwdriver is a tool to tighten these screws however, care must be taken not to over-tighten them since this could cause damage to internal components.
A broken lock can be dangerous for you and your family, especially if you have small children. They can open the door without knowing, giving them access to your home. If you are worried about this happening, then a vetted locksmith can provide fast and efficient assistance to secure your double-glazed doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on both uPVC windows and doors. We can also modify the locking system on your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always required.
Handles that are broken or damaged
A lot of double-glazed windows come with a multi-point lock as a part of the overall security package. This is a great option for those who are concerned about burglars who are opportunistic and trying to gain entry to their home. Ask your locksmith about antilift blocks. These can be installed alongside your existing locks and aid in keeping your windows shut.
Handle locks are usually damaged or fail. They are the first part that a criminal will utilize to force open your window. The good news is that this is among the most straightforward parts to fix.
Modern uPVC handles and aluminium handles come with a multi-point locking mechanism known as Espagnolette, which is designed to resist forced entry. This upgrade to security is typically available as an extra on new uPVC window installation. Older style uPVC and aluminum handles can be upgraded to lock bolts that shoot and again as an additional feature on all new double-glazed windows.
When a handle is faulty it is essential to get the handle repaired as quickly as you can. Faulty handles can prevent the window from closing properly and also allowing drafts to enter. It could also be a weak point that burglars who are opportunistic could exploit, therefore placing your home and belongings at risk of being stolen.
The process of fixing the malfunctioning mechanism begins by opening the window frame and removing the broken handle. The gearbox can then be accessed to determine the type of gearbox that is used to open the handle. This will allow a replacement that matches the profile and internal window frame mechanisms.
Once the mechanism is replaced the handle can then be re-attached using the original screws - however, we generally recommend replacing them with more long screws since this will provide the most secure fit. The final step is to seal the handle using an opaque sealant. This will help protect it from further deterioration. After this step is completed the window should be functioning again at a fraction the cost of replacing it.
Hinges that are Broken or Faulty
If your windows do not close properly, you may experience draughts, the weakening of your home's security barrier, and an increased risk of water or damp damage. Broken or faulty window hinges are a typical issue and can be repaired easily.
If you have a uPVC window that won't open or close it's likely that the hinges are broken or damaged and require replacement. While most window manufacturers require you to purchase a new window unit in order to solve this issue We're able to repair the hinges that are damaged and save you money.
Window hinges are often damaged due to repeated use or might be damaged due to corrosion over time. If you've broken a window hinge, it is crucial to take the necessary precautions to avoid further damage. This includes not causing the window to open or close.
Identifying your hinge type will help you locate the right parts to repair it. The most commonly used types of window hinges include Maco, Mila, Roto and jerealas (www.Jerealas.top) a variety of other brands. It's best to consult a professional in this case so that you don't make the mistake of buying parts that aren't compatible with your current hardware and cause further damage.
Faulty hinges can be a major issue for your uPVC window and doors. They can be an important source of noise, and they could also allow water to infiltrate your windows.
To fix this issue, first verify that the pin barrel on both hinge halves is aligned. If it isn't then tap the head pin with a hammer to make a shallow bend in the barrel of the hinge. This will help keep the pin in the right position. Then, ask a friend to hold the door as you remove the hinges and hinges from both the doorjamb as well as the door. Replace the hinges with those of a matching size and then attach the screws using glue. Finally, secure the hinges with clamps or weights until the glue sets.
Once you have repaired your hinges, you are able to install the door again. You can also reattach the handle. It is a good idea to replace the screws with the same length of dowels as the screw that was originally used so that they align with each other.
Broken or faulty glass
While uPVC windows do an excellent job of keeping cold out and the heat in, they can become damaged over time. This can be the case with broken or damaged glass as well as damaged locks. This is a problem that can be costly if left unattended. It also can detract from the aesthetics of your house and could lead to a loss of insulation, which is why it's crucial to repair any damage as soon as possible.
You can fix your cracked glass yourself if you have the right tools and techniques. Make sure that the area surrounding the glass that has been broken is free of debris to ensure that pieces of glass do not cause injuries or trip hazards. Remove the broken glass pieces and dispose of them in a appropriate manner. Apply masking tape to the entire area. This will prevent shards of glass from sticking to your skin and scattering when you move them. Making sure the glass pane is fitted prior to gluing it in place is an ideal option in the case of windows that have two panes. This will ensure you have enough room to finish your project.
Use a clean, dry cloth to clean the surface of the broken glass and Jerealas.Top the frame prior to applying the glue. Follow the directions for application and curing time, which can vary from product to product. You may have to clamp the broken glass with clamps made of lightweight materials designed to hold delicate materials, depending on the angle.
After the adhesive has completely cure, carefully insert the glass inside the window frame. Make sure that it is flush with the frame edge and Jere Alas that there aren't any gaps between the glass sash and the frame. Be cautious not to flex the window as it's being reinstalled, as this can weaken the seal and lead to water infiltration and condensation.
If you have a glass window that's completely broken or has larger cracks, contact a professional glazier such as O'Brien(r) to arrange the replacement. It's important to act quickly in the event of broken glass.