Cambridge Education

Ghost Immobiliser Installation

Install a ghost immobiliser on your vehicle to protect it from car thieves. Our TASSA-certified system guards against hacking, key cloning and also vehicle immobiliser bypass.

The system is hidden within the wiring loom of your vehicle, making it totally invisible to anyone looking. It works by creating pin code push sequences by using existing buttons on the steering wheel, door cards and centre console.

No circuit cuts

It's not surprising that owners are concerned about protecting the vehicle they have worked so hard to buy. Traditional security devices, like wheel locks or alarms, are easily manipulated by thieves. A ghost immobiliser is a extremely effective solution that works in a quiet manner and can't be recognized by modern day thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU via buttons already on the steering wheel, dash and door panels, to create a unique pin code that you only know. The code can be altered at any time and can be as long as 20 digits long depending on what you prefer. It also comes with a secure emergency code that you can utilize in case you forget your PIN.

The ghost immobiliser 2 immobiliser can be used to prevent relay boxes from transmitting the signal of your car's key from inside your home, which could unlock the doors and start the vehicle. It can also block advanced methods of stealing your vehicle, such as OBD port hacking. The device is small, weatherproof and hard to spot. It's also hard to hack.

The ghost immobiliser comes with a further advantage: it can be installed in your vehicle without leaving any permanent marks. It is ideal for those who are planning to sell their vehicle in the near future. It's also quicker and easier to install compared to a factory-fitted unit.

The Autowatch Ghost, a revolutionary new-generation device, prevents thefts from cars that are not connected to a vehicle's CAN network and using the buttons to generate a unique PIN code. This is a stealthy device that can be put in without wires being cut and doesn't require any additional key fobs. It also connects to the original ECU of the vehicle, thus preventing thieves from bypassing it with a new key. This system is TASSA-certified and can be linked with an International Security Register. Owners can rest assured, knowing that their vehicles are protected from theft.

No RF scanning

If you've put a lot of time and money into the customisation of your vehicle, you will want to safeguard it from theft. Installing an immobiliser is among the best ways to prevent theft. It will prevent your vehicle from starting until you input the unique code. By using the buttons on your steering wheel as well as the dashboard, you can create a PIN up to 20 digits long that is only known to you, ensuring that only you are able to drive your vehicle. It is also possible to set up a service or valet mode, which will allow you to start your car for a short period without entering the PIN code. This will allow technicians to work on your vehicle without you being present. This is a great option for those who wish to cut down on time and make their lives easier.

Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle and uses buttons on the dashboard and the steering wheel to set a PIN number. It is designed to blend into with the rest of your vehicle, since it doesn't emit any noise or light indicator. It can be put in anywhere on your vehicle without impacting the appearance of your vehicle.

This stealthy device is TASSA approved and can reduce your insurance costs. It comes with a tracking feature that will locate your vehicle even if it's gone missing. This is a great feature if you own a rare expensive vehicle that you've put time and effort to customize.

The Autowatch Ghost can be used together with an iPhone application that allows you to remotely start your vehicle in the event you forgot your PIN or not able to access the vehicle for some reason. This feature is perfect for those who need to pick up the kids or go on errands, but don't want having someone else drive your vehicle. This feature is helpful when you need to take your vehicle in for repair or service.

Another benefit of the Ghost is that it doesn't transmit or detect radio frequency signals, which makes it unnoticeable to thieves using RF scanning or code grabbing technology. It can also protect your car from key copying and ECU swapping, which are typical methods of theft from cars.

No key to cloning

ghost installation immobilisers are a great option for protecting expensive automobiles and are designed to stop key copying. They prevent your vehicle from starting without a PIN code being entered in conjunction with the regular key fob. This makes it very difficult for thieves to steal your vehicle, and could deter them from attempting. This is a good idea if your vehicle has been heavily customized or if it's rare.

These immobilisers are linked to the vehicle's CAN data network and are completely hidden which means that their presence isn't visible. It is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a burglar will have to spend how much is a ghost immobiliser; simply click the up coming site, longer in order to successfully steal your car.

A criminal will need to be aware of the pin code and the location of the ghost vehicle immobiliser in order to bypass it. The pin code is exclusive to you and you can alter it as many times as needed. The pin code you choose is easy to remember, but mathematically impossible for anyone else to decipher. The engineer will also provide an emergency pin code in case you forget the pin.

The ford focus ghost installer CAN Bus immobiliser is able to be easily installed anywhere on your vehicle. It works with all vehicles and completely customizable to match the style of your vehicle. It is also very affordable and simple to use. The device can be transferred to another vehicle, provided that it is compatible with the new vehicle.

The CAN bus can be used with other security features. It can, for example detect damage to the vehicle and alert the owner. It also can stop the engine in the event that the vehicle is damaged. The system can also protect your vehicle from key cloning and hacking. It also detects vibrations or contact with the vehicle. It can also alert the owner when the vehicle is moving.

No OBD port hacking

Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, disable your key fob, or create new keys. This technology is a major improvement on traditional methods that have been employed by thieves in the past to steal your car. The CAN data networks means that your system won't be affected when you disconnect or change your battery.

The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that protects against key-cloning, hacking and replica car theft. It does not use LED indicators or key-fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN code sequence (up to 20 button presses) that must be entered first before you can drive your car away.

Modern thieves use diagnostics to detect circuit breaks on your vehicle. They can bypass immobilisers that require a large amount of wiring or are integrated in the wiring. The Ghost is weatherproof, doesn't require additional wiring and cannot be detected by diagnostic tools of a professional. It can be used on vehicles equipped with anti-theft devices.

Another benefit of a Ghost immobiliser is that your vehicle is only able to be started by a person who has access to the PIN number and has physical access to your car. This is a major advantage over traditional security systems which can be bypassed with simple cable tampering, a screwdriver or the utilisation of a universal remote controller.

If you forget your PIN you can easily reset it using the emergency PIN reset function on a mobile phone or computer. This is helpful if you want to start your vehicle after having left it in a garage or by using the help of a valet parking service.

The Autowatch Ghost 2 has been certified for insurance by TASSA and can be installed by our authorized installers. It has the QR fingerprint system to identify parts that are not in use that allow for the return of stolen items in the event that they are found. It can also be set to'service mode', which allows the engine to be started when your vehicle is in a garage or with valet parking but you will need to enter your PIN code once more to exit the vehicle.