Cambridge Education

Add a Sparkle to Your fiat replacement key 500 Key Fob

Add a touch of fun to your Fiat 500 Key Fob using these adorable silicone covers. They're easy to put on and snap into place of your original black cover.

The silicone covers protect your car keys from splashes and dust. The silicone covers also make your keys look more stylish. The signals from the remote control are not affected and work even when the cover is on.

Guards your key from splashes and dust

This silicone cover will add a touch elegance to your key. It is perfect for the key fob, without loosing. It also protects your key from splashes and dust. The silicone cover will not alter the signals transmitted by your key remote. Therefore, you can use the buttons on your key fob just as you would normally.

Accessorize your Fiat 500 with these funky covers in Grey and Black. These covers are perfect if your original cover is looking a little worn, scratched or damaged. The covers are made from high-quality silicone and come with two key rings, so they can be swapped out when you're bored of one color.

These covers replace the stock, black key cover that is on your vehicle. These covers will not fit if you have the original key cover installed.

Looks great

Fiat are a truly unique and iconic Italian brand, and their cars are a striking style that makes them stand out from other brands. These dazzling car key covers are an easy and fun way to add a little sparkle to your keys without being too overpowering. They look fantastic on the key fob and really freshen up an old-fashioned one.

The covers snap easily into place and are designed to replace your black cover. It is recommended to take off the old cover prior to installing the new.

They are available in Grey and black, and the fiat logo is printed on both. If you ever change your decision, you're able to change it! These are also great presents for Fiat 500 drivers.

Easy to install

Fiat 500 Key Cover (Www.Diywiki.Org) 500 key covers are an simple way to update your car keys. You can pick from a variety of styles and colors to choose the one that matches your personality. The greatest thing is that they're simple to install, so you can do it yourself in less than ten minutes. You'll need an screwdriver and some time. The first step is to remove the previous cover from your key. This needs to be removed before the new cover can be installed.

After you have removed the cover after removing the old cover, you can employ a flathead to remove the four major attachment clips out of the passenger side of the fob assembly. These are marked with red on the picture below. Also note the tabs that locate slots that are highlighted in yellow. They must be removed in addition.

After removing the battery, replace it with a new CR2032 3 Volt coin cell battery. The "+" side of the battery should be facing the opening on the fob, and the "-" side should face the buttons made of rubber.

Attach the cover for the passenger side mirror by aligning locating tabs. Once you have done this, place the fob for the driver side back in your vehicle and test it by pressing the push button on the front of the car key. If everything is working properly, the parking lights should be turned on and the doors will close.

Easy to remove

Fiat 500 Key Covers are a great way to freshen up your key fob. They are easy to install and have a unique look. They shield your key fob from dirt, scratches, and smudges. However, before you are able to install a new cover for your key you must remove the original cover from your vehicle.

This can be done by pressing the red "Fiat" button located on the front of your key fob. Pressing the button will open a lever that allows you to slide out the switch for ignition on your key (1). After removing the metal keys you will see a small silver switch that has images of a padlock both unlocked and locked keys in car boot fiat punto next to it. This is the key fiat 500 fob battery switch. It is easy to change the battery by turning the switch quarter turn using the small screwdriver flathead.

The key fob comes with a microchip inside that is used to communicate with the Body Control Module (BCM). When you insert the key into your fiat replacement key fob vehicle, it presses the ignition switch, which functions as a "key-in-ignition" reminder. The BCM will then be capable of reading the transponder inside the key fob and verify that it's legitimate.

You can also purchase the twin pack with a sport design to give a unique, fun design to your key covers. These covers snap into place over the original cover. They are available in Cream and silver. The key cover will only work when you remove the black cover from the key fob.