Blog entry by Leonora Aspinall
How to Find a Fiat 500 Spare Key
Fiat's classic 500 has evolved into something of an iconic vehicle since its relaunch in 2007. The company is now planning an additional attack against different powertrains with the launch of a mild hybrid version.
The replacement of key fob batteries on a Fiat 500 are simple and inexpensive. The Fiat main dealer will deliver the key in approximately 10 days.
Troubleshooting
The key fob comes with an electronic chip that communicates with the fiat key cutting immobiliser system. This ensures that only cars with a valid license can start the vehicle. If the transponder on your key fob has been damaged the chip will not be connected to the immobiliser, which means that your vehicle won't start.
It is possible to repair the key fob of a person who has been damaged, so long as the chip isn't physically damaged. A professional locksmith will use standard technologies from dealers to repair it quickly.
It's possible to use an OBD scanner to determine whether your device is communicating with the receiver module. It's a simple process and provides an initial indication of where the issue is. If the OBD scanner reports that there is no communication between the receiver and transmitter modules, it could be necessary for the fob's transmitting module to be replaced. This is a costly solution and should be left to locksmiths.
Dead Coin Battery
A
dead battery for the coin is the most common reason for the key
fob to not function. This is an easy fix that only takes about a
couple of minutes. First, ensure that the key fob is within the
range of your vehicle. Then, try pressing the "Lock" or "Unlock"
button to check if it responds.
The key fob might not work at all, or perhaps only occasionally, if it's out of range. This could be a sign that the circuit board in the key fob has failed. In this case you'll need to check the owner's manual to find out instructions on how to reprogram the key fob.
The mechanical latch can be removed from the back of the key fob. (See the image below). Then, gently pull the edge of the battery holder away from the switch to release the old battery. Then, insert a new volt battery into the fob holder with the "+" side facing the rear cover of the key fob with the "-" side facing downwards toward the rubber buttons.
Water Damage
The key fob is not waterproof even though it's got rubber seals that stop water from entering the electronic chip. A splash of water from rain or a wash cycle is likely to be okay but submerging it fob in ocean or pool water will probably damage it.
The key fob will need to be reprogrammed if it is exposed to water. You can follow the directions in the owner's guideline, or visit an experienced locksmith or Fiat dealer.
A fob that's not in range may not function. The range of a key fob is usually about 30 feet. If they are too far from the car, it may not recognize them. The first thing to try is to move closer to your car. If this doesn't work, then the battery for your key fob may require replacement. You can find battery replacement instructions for most automobiles on YouTube or in the owner's manual. If your key fob appears damaged and scratched, it's time to replace it.
Faulty Receiver Module
In more modern models of fiat 500x key fob programming cars you don't need a physical key to open the car or start it. The cars utilize keys that send a wireless signal to the car, allowing it to turn on and off the engine. A locksmith can replace the damaged keyfob. You will save time and money by delegating this job to professionals. They can also program a new key to your Fiat.
You will need to provide the locksmith with a few details over the telephone when you want to purchase a spare fiat punto key fob replacement key. For instance, you will be required to mention the year of production for your car, along with the name of the model. This is crucial because locksmiths need it to ensure that the new key is compatible with the existing locks.
Not all locksmiths can make replacement keys for Fiat cars. Find a locksmith that has an excellent track record and experience in the field. This means that you are sure that the new key will work with your car and you won't waste money.
Keys that are unpaired
If you have a key fob that has isn't working, the most frequent reason is the battery is dead. The key fob comes with metal clips that hold the battery in place, and completes the circuit. If these clips wear out or loose, it can result in contact issues and then no power. Replace the battery with an identical replacement fiat 500 key Fob (frozenllama.io).
It is essential to dry out the key fob if it has been submerged in liquid. This can be done with isopropyl or electronic cleaner. It is also recommended to remove the battery and clean the circuit board, and replace it prior to replacing.
Contacting a locksmith is the best option in case you cannot find an alternative. A locksmith who is experienced can reprogram a Fiat transponder key without having to look up your original keys. This is a much faster and less expensive solution than waiting for a genuine Fiat key from Italy to arrive. A professional locksmith will have the tools and equipment necessary to complete the replacement as quickly as possible.