Cambridge Education

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However If windows with double panes are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window repair panes to ensure that any shards fall on the fabric and not onto the floor which could cause them to be trampled.

It's a good idea to cover the gap with tape after the glass is removed. This will keep water and drafts from entering your property until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the distance between the window and the door is substantial, you may need to consider an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, with time, they can suffer from a variety of problems including sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need to open the window to access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in place.

If you are unable to move the hinges, you may have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. Often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC hand. The first step is to close the window and perform an initial test fit. The joints at the corners of the sash must align with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is essential to take action if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the issue is, old caulking may have to be removed. It is important to remember that when it comes to upvc window repairs; simply click the up coming website page,, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious cases you may need to think about replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double glazed window repairs-glazed glass it is more likely that the issue is more with the seal than the frame. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component hinges will be damaged over time. It is very easy to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either due to opening the window repair in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be pleased to offer you advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. This should be done at least every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also be misaligned due to wear, creating a gap where the sash and frame meet. If they are damaged beyond repair, it may be required to realign them. The second is the interlock, which is located on the hinge of the window and can be misaligned. Again, it may be possible to give them a clean but in certain cases, it may be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. They will help stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. It is essential to remember that all windows eventually get worn out and it may be more cost-effective to replace them instead of fixing them. So, if you are experiencing problems with your upvc windows, it's best to seek professional assistance as soon as you can.