Cambridge Education

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. If windows with double glazed window repairs panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that assist the new pane to fit properly into the frame of the window.

If you are going to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor and could be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the distance between the door and the window is significant, you may need to consider security screens that has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems, including sagging. A sagging window in upvc window repairs near me could cause issues with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sliding. You'll first need to open the windows so you can get at the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to hold them in the right position.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can be due to the mechanism of the handle getting worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window repair near me and do a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on how severe the issue is, old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. Again this can easily be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze it could be hinges that are at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It's easy to change the hinges on a window repairs, but it's easier if someone helps hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular manner or because of inadequate installation at the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges, also due to wear and tear could become misaligned. This causes a gap to form where the sash meets the frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it is possible to just give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to realize that all windows have a life span and they may reach an point at which it is more economical to replace them than fix them. If you have any problems with your upvc window it is recommended to speak with an expert immediately.