Cambridge Education

Ghost Immobiliser 2

Guards your vehicle against key cloning & stopping thieves driving it with your original keys. Our latest immobiliser is connected to your vehicles data network, CAN, and a unique PIN code must be entered for the engine to start.

Unlike trackers Ghost does not transmit any radio frequency signals & can't be detected using diagnostics tools. Ghost doesn't have LED indicators or buttons that would signal its presence in your van or car.

Anti-key cloning

The ghost immobiliser has been designed to stop key hacking and cloning. The device connects to the CAN data network in your vehicle and creates an unique pin code push sequence using the buttons that are factory-installed on your dashboard and the steering wheel. This stops the criminal from being able to start your car. If the incorrect PIN is entered it will stop your engine from starting and making it impossible for you to drive away with joy and pride.

Ghost immobilisers employ a new technology which is extremely difficult for thieves to defeat. The ghost immobiliser, unlike physical deterrents like wheel locks or steering locks that are able to be cut, is a discrete electronic device. It can't even be identified by thieves since it doesn't emit radio signals and functions in a quiet manner.

The new generation of immobiliser is able to protect your car from a variety of threats like keys that are duplicated, key-hacking, and relay attacks. It also stops thieves from stealing keys or replacing your ECU because it won't permit them to start your vehicle without entering the correct PIN.

Contrary to other immobilisers, the ghost immobiliser 2 does not require any additional key fobs or remotes in order to operate. It can be turned off using an app on the driver's smartphone. This is ideal when you have to hand your car to valet parking, or servicing without the key fobs.

The Autowatch Ghost-II represents the latest evolution of Ghost's immobiliser. It is designed to be as easy and easy to use as it is possible, while remaining as secure as ever. This is done by integrating the Ghost-II into the vehicle's data network CAN, which means there aren't any additional wires to hide or easily found. It also comes with an inbuilt feature that allows you to disarm the Ghost-II simply by connecting to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking has become the latest method used by professional car thieves. Thieves have access to your vehicle's OBD port with nothing more than a laptop, an application, and a few cables that can be purchased on the internet for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they like from changing fault codes and tuning your car to stealing your pride and joy in just a few seconds.

If you have a Ghost immobiliser installed, it will protect your vehicle from theft using this method by requiring that an unique PIN code sequence is entered on your key fob to start the engine and then drive away. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. It is not detected by any scanning technology, RF or code grabbing. It even comes with a Service/Valet option that will allow your vehicle to start without the need for a PIN code.

You will also need a cable with OBD pins that are connected to the CAN bus. These cables can be found on eBay or Amazon for around PS50. Also, you will require a cable that has OBD pins connected to CAN Bus. These cables are available on eBay or Amazon for PS50. The next step is to connect the cable into the wiring harness of your vehicle for example, the radio wiring harness.

Once the hacker has a connection to your vehicles OBD port, they are able to send diagnostics requests to the system at high baud rates that can crash the CAN, and prevent systems within your car from functioning. This could cause your vehicle's engine to stall or even lock up.

No additional remotes or key fobs required

A car immobiliser is a great piece of anti theft technology used by millions of modern vehicles around the world. Utilizing engine ECU software to prevent cars from starting if a fake transponder signal is detected by it an aftermarket immobiliser can be an excellent method of protecting your vehicle.

However, it could be easy for a thief to bypass an immobiliser system when they have access to the code to deactivate it. The battery inside most key fobs can be easily removed by removing it, so a thief can use a simple tool to take out the immobiliser's circuit board and replace it with an empty. They'll then be able to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser communicates with engine ECU (Engine Control Unit) through a discreet and silent CAN data circuit that is unnoticeable with diagnostic tools, such as those employed by high-tech thieves. It also does not use a traditional key-fob with LED indicators, so it is able to go unnoticed at sight.

You may have to turn off autowatch ghost immobiliser installation's Ghost 2 automatic protection at certain times like during valet parking or a service job. The ghost CAN immobiliser has a special mode for this, called "Service Mode that can be activated with a push of an app on your smartphone. The car is still operated however, the maximum speed is limited to 36mph for added security.

If you'd like to know more about the TASSA certified bmw x5 ghost installer immobiliser, please contact us today to book an appointment in our workshop. A member of the team will provide a full breakdown of the process and provide you with your owner's manuals, installation certificates, Ghost 2 emergency card and security assurance.

Simple Change of PIN Code

Ghost is a next-generation device that protects your vehicle without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicle's CAN data network. A personalised PIN is set by pressing buttons on the dash and steering wheel. The device doesn't emit RF signals, which means it cannot be bypassed. This makes it unrecognisable by sophisticated scanning or code grabbing technology that modern thieves employ.

The PIN code sequence can be altered anytime you want to block previous drivers. It even comes with an override code incase of lost sequences. The installer will guide you through how to install ghost immobiliser to do this during installation. The system comes with a valet-mode feature that allows you to temporarily disable pin input sequences so that the garage or mechanic can work on the vehicle without knowing the code. This is ideal for customers who wish to surrender their car for valet parking / service but still don't want to divulge the pin sequence.

Contrary to Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that makes use of the buttons on your car to create an unique and interchangeable PIN code sequence. This sequence is entered via the app on your smartphone. No additional LED indicators are thrown, and your car will be protected without any possibility of being disabled.

Every vehicle is tested

A ghost immobiliser, in contrast to key fobs that require you to press buttons, is discreetly placed under the steering wheel or dash. Only you will know it's there. The device is connected to the CAN network of your vehicle, and a PIN code can be programmed using the buttons on your vehicle. The system stops your engine from running until the code has been entered before. This means that thieves can't duplicate the keys on your car or access the OBD port to hack your vehicle.

Ghost can be utilized in all vehicles, including electric cars motorhomes, vans, and bikes. It's also extremely versatile and can be programmed to shut down in a variety of situations. For instance, it can be programmed to go into Valet mode when the vehicle is being taken to a valet park or a service provider. This allows you to drive your car within a speed limit of 30 mph, and the ghost immobiliser reviews immobiliser will turn on itself when your vehicle returns to your home.

Another fantastic feature is that the device can be reset to your personal PIN code at any point. This is helpful if you forget the code or the device is inoperable and is as good as new again.

It's also important to note that the device is completely inaccessible to those who aren't familiar with it. It works by running through existing buttons on your car's dashboard and steering wheel, and utilizes the information they send to recognise the button that was hit. This makes it a completely secure and reliable security option that can't be tampered with by jamming, RF scanning, or door lock pick sets.